‘Blackout’ by Roger Mais Essay

‘Blackout’ is a short story by Roger Mais. It is set in Jamaica and is about racism and the contrast of two different races, sexes and cultures! The story starts off explaining the blackout in the city and the general atmosphere of uncomfortable and tense over the city. At this point the story builds an expectation of some sort of conflict. An American women was waiting at a bus stop. Suprisingly she was not bothered by the darkness, and she was not nervous. A black man slowly approaches her and asks for a light for his cigarette. As she does not have matches she offers her cigarette and as he thanks her she flicks the cigarette away. She does that because she is disgusted that a Black man touched her cigarette and therefore she doesn’t want to smoke it anymore. After the flicking, there’s a moment of discomfort and she asks him why he was still there. He replies with an apology as a comment on her action. He stays and keeps talking about her apparent wealt h and as he talks she becomes more uncomfortable. The conversation between the two then focuses on gender and race. At that moment the reader can sense that actually the woman is interested in the current situation and she might actually be looking for an adventure, but he tells her that she is not his type of women which undermines her. During the conversation the reader can also see that the woman has some very racist thoughts. After a while he sees the bus coming and points at it. She gets on the bus and as it starts moving, she urges herself to look back at him and challenge her prejudices, but thinking of the society and worrying about how unacceptable it would seem she can’t succeed and doesn’t look back while the man picks up the cigarette from the gutter. During this short story there is always this feeling of menace and some kind of threat which is created by the blackout and the odd conversation between the two. This feeling is created especially at the beggining, introduction of the story when the blackout and the loneliness were being described by Mais. He used words and phrases such as; wave of panic, bands of hooligans roaming the streets after dark and assaulting unprotected women, slinking black shadow, to reinforce his point. Telephone Conversation ‘Telephone Conversation’ by Wole Soyinka, the poet talks about two people on the phone and the story goes on to narrate how the African man is looking  for a house and the land lady has proposed a considerable price for the same. The poem strikes a positive note as the man gets to know that his privacy won’t be hampered as the landlady doesn’t stay on the premises. The African man is happy to know that and just before he makes up his mind to consider the offer, he drops in to mention that he is black. On the other end of the line, there was nothing but silence which the African man takes it to be an impolite gesture of refusal. However, the silence is soon broken as the landlady starts to speak again asking him to explain exactly how dark he is. First, the man think that he might have misheard the question but when the landlady repeats, he understands that this is something very important for her to know before she allows him to rent her house. This is so mething that came out entirely devastating for the African man and for a moment he felt disgusted with the question and fancies himself to be a machine, like the phone and that he has been reduced to being a button on the phone. He could also smell the foul from her words and he sees â€Å"red’ everywhere all around. The idea of Telephone conversation is to depict how brutal it can be for a man who is subjected to racial discrimination. The Afro-American man is reduced to shame by the sudden silence from the other side and he gets into a state of make belief where he sarcastically thinks that the lady broke her silence and gave him option to choose and define ‘how dark† he is. â€Å"Like chocolate, or dark or light?† Then, he goes on to answer that he is defined as â€Å"West African sepia† in his passport. The lady not knowing how dark it could be didn’t want to embarrass the man further by resorting to silence. So, she asks him to define what he means. The man replies, that it is almost similar to being a brunette but a dark brunette. All this while, the man has been holding on to codes of formality which breaks loose at the landlady’s insensitiveness. The African man now shouts out loud saying that he is black but he is not that black for anyone to be put to shame. He also says that the soles of his feet and the palms of his hand are all white but he is a fool that he sits on his rear which has turned black due to friction. He knows that the landlady will never be convinced with his black complexion and he senses that she might slam down the receiver on him. At such a crucial juncture, he makes a desperate and silly attempt to plead her to come and take a good look at him but couldn’t help the situation from getting worse. Finally, the landlady slams down the  receiver on his face. Harlem ‘Harlem’ by Langston Hughes reflects the post World War II mood of many African Americans. The Great Depression was over, the war was over, but for African Americans the dream, whatever particular form it took, was still being deferred. Whether one’s dream is as mundane as hitting the numbers or as noble as hoping to see one’s children reared properly, Langston Hughes takes them all seriously; he takes the deferral of each dream to heart. Harlem simply asks, and provides a series of disturbing answer to the questions, â€Å"what happens to a dream deferred?† A closer reading reveals the essential disunity of the poem. It is a ground of unresolved conflict. Five of the six answers to the opening questions are interrogative rather than declarative sentences. The ‘dream deferred’ is the long- postponed and frustrated dream of African Americans; a dream of freedom, equality, dignity, opportunity and success. This poem concentrates, on possib le reaction to the deferral of a dream. The whole poem (Harlem) is built in the structure of rhetoric. The speaker of the poem is black poet. Black people were given the dreams of equity and equality. But these dreams never came true. Despite legal, political and social consensus to abolish the apartheid, black people could never experience the indiscriminate society. In other worlds, their dream never came true. Blacks are promised dreams of equality, justice, freedom, indiscrimination, but not fulfilled. They are delayed, deferred and postponed. Only promissory note has been given but has never been brought into reality.The speaker rhetorically suggests that the dreams will explode and destroy all the limitations imposed upon them. After that the society of their dream will be born. When the dream is postponed or deferred or delayed, it brings frustration, it dries up like a raisin in the sun but there is wet inside, likewise it stinks like rotten meat, it becomes fester like a sore and one day it will explode and cause larger social damages. The poem is in the form of a series of questions, a certain inhabitant of Harlem asks. The first image in the poem is â€Å"dream dries up like a raisin†. The simile likens the original dream to a grape, which is sound, juicy, green and fresh since the dream has been neglected for too long, it has probably dried up. The next image in the poem â€Å"fester like† a sore and then run† conveys a sense of infection and pain. Comparing the  dream to a sore of a body, the poet suggests that unfulfilled dreams become part of us, like a longstanding injury that has gathered pus. The word â€Å"fester† connotes something decay and â€Å"run† literally refers to pus. From this viewpoint of the speaker, this denotes to the pain that one has when one’s dreams always defers. A postponed dream is like a painful injury that begins to be infected. The next image â€Å"Does it stink like rotten meat† intensified the sense of disgust.

How To Write A Research Paper Essay

This guide covers research papers, and provides advice on forming a title for your research paper, how to plan your paper before you start, and filtering material for your research paper. What is a research paper? The terms ‘research paper’ and ‘term paper’ are frequently used interchangeably. However, the terms do not mean the same thing. ‘Term paper’ was used in the past exclusively to refer to the project (indeed research based) that was due at the end of a term, semester or quarter whereas ‘research paper’ had a more specific meaning, i.e. a paper written as a summary of research. Hence ‘research papers’ may be written at any level (before, during and after attending university), they may be published works in a professional journal and they may represent the results of practical research, which would not ordinarily be conducted for a term paper. This is the context in which we will discuss the term ‘research paper’ herein. A research paper is an academic written assignment that is the product of a research project. This may span days, months, weeks or even years. Typically, research papers will involve the examination of a particular issue, and discuss: * The background or history of that issue * Any outstanding questions relating to the issue (the research paper will commonly focus on one particular question and seek to establish evidence to answer this) * The current data and statistics relating to the issue * The problems relating to the issue as revealed by the data * The problems relating to the issue as revealed by practical primary research (i.e. carrying out interviews, tests etc) or secondary research (i.e. looking at other people’s research) * Proposed solutions to the problems, and the strengths and weaknesses of these * Conclusions drawn from the data, research and evidence, as examined * Recommendations in relation to these conclusions. We will look at each of these elements in turn, in order to understand how a student or professional can write a good research paper. Forming a title for your research paper Unlike most types of assignment, the research paper title is usually decided upon AFTER you have completed the paper. This is so that the title accurately reflects the contents of the paper. However, your research paper will need a working title. This helps you to focus and helps others to understand what you are doing – for example, your lecturer/instructor or, if working at a higher level, those funding your project. You should therefore return to this section when you have completed your paper. You then need to pick a concise, accurate title for your research paper that will make readers want to look at your content, help others find your paper in databases, and explain exactly what is covered by the paper with a high degree of accuracy. A research paper will commonly have a title of 15-20 words in length. Every word must be necessary for the title – and so for example, ‘Project on†¦Ã¢â‚¬â„¢ ‘Paper on†¦Ã¢â‚¬â„¢ ‘Research on†¦Ã¢â‚¬â„¢ should be removed as these types of phrases are not necessary. Example concise research paper titles: * Unemployment by Constituency * Transport in New York Research Paper Subtitle Unlike a research paper or essay, it is very common to give your research paper a subtitle. This explains your title more fully, puts it in context and qualifies the extent, or scope, of the research. Example subtitles (relating to the above example titles): * 2007-2008 trends using constituency maps * Transport governance and provision since X was elected in 1999 Researching/gathering information for your research paper As your research paper needs to show a good depth of reading, good research skills are paramount! But before you start, a key thing to bear in mind is that you MUST reference all material that you use in your paper. So the first thing to do is find out what referencing style is required (either by your university or, if you are writing a research paper for a journal, by that journal) and start to record the location of your sources using that referencing style. If you do this as you perform the research, you’ll save yourself hours of time later on. Here are some research tips to get you started: RESEARCH STEP 1 * Form a list of keywords from your research paper’s working title * Use a thesaurus to find words that mean the same thing as your list of keywords RESEARCH STEP 2 Most students will begin researching using the Internet and indeed, this is a great way to get ideas for your research paper. So start with Google, type in your keywords and bookmark the most relevant information sites that appear in relation to the issue. Then identify all current matters that relate to your issue from those sites. Note: Internet websites provide a fast source of up-to-date information but unfortunately they are not a reliable source. Use a search of the web as a starting point but unless the website is hosted and edited by a ‘reliable’ organization (such as the Government), don’t rely on its contents as a source for your research paper. Find another means of verifying the information. RESEARCH STEP 3 Now you’ve identified a list of issues and current debates for your research paper, you need to find some quality source material. The first stage is to find the most recent books written about the issue you’re researching. Whilst books are not as up-to-date as journals and articles, they will contain valid points-of-view that need to be considered. So where do you find books for your research paper? * Google Books – this is a good place to start as it has several thousand books that have been scanned in, together with details and snippet views of those which haven’t been scanned in. * Amazon.com – Amazon is a good source because you can see which books are being released, and their release date, as well as using ‘search inside’ to look through the contents of many books (this latter service only works if you have placed an order before) * Questia – Questia has thousands of books scanned in although you have to pay a small subscription fee. Your university may also provide you with access to a library and you can then search through their databases to find the most relevant and recent books for your research paper. The best way to scan whether a book is relevant to what you’re writing about is to look through the index. You’ll quickly see if there’s anything useful in the book for your research paper. RESEARCH STEP 4 Now you have the latest books for your research paper, you need to start looking for journals. These really should be your main type of source material. Open University Web Resources is an excellent list of such journal databases, although you’ll need an ATHENS password to use some of them. Our favorite journal databases for consistently excellent and up-to-date content are: * ScienceDirect – 2,000 peer-reviewed journals, books, handbooks etc * EBSCO- thousands of journals, millions of articles * Emerald- thousands of journals in management and library and information services, engineering, applied science and technology * Ingenta – 4,500+ journals in all fields and a further 20,000 abstracts The latter source, Ingenta, gives you FREE access to the bibliography which is useful for your research paper even if you don’t have an athens login. Locate articles relating to your subject and check out the bibliography for further reading which you might be able to locate online without passwords. You can sometimes obtain a free trial of these databases giving you temporary access. Also, the four websites also have a good number of journals that you do not need a subscription to view. These are often indicated by a special icon. For example (from Ingenta): RESEARCH STEP 5 There is one final type of source material you need to consider, and that is the news. If you’re lucky enough to have an athens password, your first stop will be Lexis Professional (formerly known as LexisNexis Executive) which contains the full text of newspapers and other news sources worldwide; as well as company data, annual reports and business directory information from Disclosure, Extel, ICC, and Worldscope. If you don’t have an athens password, any good news site will suffice – US News, CNN etc. Of course, if you are researching an issue which affects another country, you should be looking at that country’s main news website. What you are looking for is any current developments that may affect the research for your paper. This may be statistics released by the Government, consultation papers, proposed changes in legislation, current developments or debates etc. Don’t forget, newspapers are NOT a reliable source of information. You are using them to find information for your research paper but you should substantiate this information once you have found it. If it is reported that the Government has released some statistics, go and find those on the Government website. If a consultation paper has been released, go and find the paper and read it. Filtering the material for your research paper The five step research process reveals a lot of information for your research paper and you’ll need to filter it down, or you’ll have too much to analyses. This does, however, beg the question – how many sources should you use? The answer to this depends on the level of your research paper. If it is an assignment for your degree, you should look at using roughly 9 quality sources per 2,500 words. If it is for some post-graduate course, you can easily double that. A professional research paper (for publication) might use 30-40 sources per 2,500 words. The emphasis in all cases, however, should be on quality and not on quantity. A good selection of research material from a variety of quality sources (i.e. not just books, not just journals, not just the internet and not just the news) is far better than a huge selection of research material from poor quality, unreliable sources of a similar type. To help filter the information you have found for your research paper, you are going to need to evaluate its quality. This involves a consideration of whether: * The source is a quality source -it’s reliable, dependable and highly likely to be accurate. * The source is unbiased – watch newspapers which may have political views. Ask yourself if the writer has presented a balance argument, or has deliberately played down one side of the argument to prove his own personal views. * The source is relevant to your research – does it specifically tie in with your working title? * You haven’t already got enough material to prove what this source proves – if you aim to back up each of your arguments in your research paper with 2-3 pieces of evidence (for a very high quality paper) or at least 2 for a student paper, then you can filter out any material that is excessive of this. Creating an outline for your research paper A basic outline will look something like this: * Working title (as discussed previously) * Purpose – this is a short statement to say what the paper is for. It helps people who are looking for research papers themselves to assess the relevancy of your research paper to their studies. Example purpose statement: This paper shows the number of people claiming benefits recorded as resident in each constituency in the United States in July 2008, together with comparisons with the levels in July 2007 and July 1997. This paper also presents residence-based unemployment rates for all constituencies in the United States. * Methodology – this is a statement of how you will carry out your research. You have already done some ‘secondary research’ but you may also wish to carry out ‘primary research’ for your paper. Primary research (sometimes called ’empirical research’) is research you carry out yourself and data that is produced as a result of this, which has never been published before. Primary research may be carried out through face-to-face interviews, telephone interviews, postal surveys, website surveys or focus/discussion groups. Be careful before carrying out research over the phone or through the post though – some states allow people to restrict how they are contacted. Secondary research is the study of data that exists already such as books, journals, statistics, other research papers, websites, news reports, magazine articles etc. You have already carried out secondary research through the five step research process. So which research method is best for your research paper? Instinctively you may think that the primary data will provide the most interesting results. However, if your time and budget are both limited, do not be tempted to embark on a study. You will do far better analyzing existing studies than producing a low-quality study that is limited in its value due to the amount of time and finance you can devote to it. * Scope of research – all research is going to be limited to certain factors. A paper on ‘crime’ cannot investigate all types of crime, committed by all sexes, all ages, globally. So how are you going to limit your paper? What areas of the issue will you look at and which will you discard? Your statement of scope will be about 150-300 words long and explain exactly what you are going to cover in your research, and what you are going to leave out (usually with brief reasons). If you are carrying out primary research, you may want to set out the limitations of this here too. * Introduction – this is where you set the scene for your reader. You explain what you are researching and why. You identify the issues you will be looking into and you say what you are going to prove. It is therefore a good idea to write this last, along with your final title! * Background/history – this section of your research paper isn’t essential but might be appropriate. You might want to explain the development of the issue and how particular matters have arisen. Don’t bother unless it is necessary, to put the matter in context. * Body – this section of your research paper will be broken up into sub-sections, each dealing with a particular sub-matter. Aim to present balanced evidence in each section on the points you wish to raise, and try not to reach any conclusions at this stage. The ‘body’ is the body of your research, not the analysis. * Findings/Discussion – here’s where you analyze the research you have conducted and say how your findings are relevant to the issue. It’s a very important section, without which you will have merely stated other people’s findings and opinions without contributing anything yourself. * Conclusion – this section of your research paper returns to the introduction and stated aims, and spells out very clearly how you achieved them, referring to the points you have proved and the evidence you have used to prove it. It should not be repetitive but instead, it should summarize the results of your research. You should also ensure no new material is introduced at this stage – if you have new material for your research paper, put it in the body and findings sections. * Recommendations – this section of your research paper is very much optional and will depend on whether such a section would be appropriate for the subject you are studying. Law research papers almost always will include recommendations. What sort of recommendations should you make? These might include: * How policies/the law/practice should be changed, based on your findings * What further research must be carried out before making any sensible recommendations. Your recommendations must actually relate to what you have established in your research paper. You cannot randomly introduce things at this stage that you think might be useful. They must be logical recommendations, based on your research and analysis, and they should follow on from the conclusion. Now you have written out an outline for your research paper, you will literally be able to ‘fill in the blanks’ and your paper should evolve and progress naturally, following the headings you have chosen. Keep referring back to your working title as you write, as well as to your methodology and scope. This should limit you to material that is most relevant and ensure you don’t include excessive, unnecessary points. Finishing your research paper Now you’ve written up your research paper, you’ll need to do a little editing and proofreading to ensure the finished product achieves the grade you’re looking for. This includes: * Weeding out any unnecessary material. Evaluate what you have written and whether it is needed, keeping the methodology, scope and working title in mind * Proofreading your research paper. Read it out loud, have someone else read it for you, run a spell check, run a grammar check – go over the paper several times and make sure you haven’t made any errors. There are often extra marks for students in respect of presentation. * Checking your referencing. Every source should be properly referenced. Quotations should be in â€Å"quotation marks†. Your work should contain a full list of references and a bibliography. References are sources you actually cite in your work whereas the bibliography includes sources which you may have read, and may have influenced your writing, but you haven’t specifically cited.

Metaphysics Assignment Example | Topics and Well Written Essays - 1750 words

Metaphysics - Assignment Example These things are real and anyone can vividly attest to that fact. There are however a lot of miseries that still remains uncovered, or things that can not be measured to ascertain their reality. One cannot come up with a conclusive answer as to their reality existence. This is why theories have been developed to answer these rhetorical questions. Reality Theories There are different theories that tend to describe and give meaning to the word reality. To exhaustively discuss reality, we must have an in-depth understanding of these theories and how relevant they are to our lives. These reality theories are; Reality 1; this is the summation of all things that are real. In this theory, reality is what is experienced as they are not as they are imagined or illusion. Reality 1 holds that, everything that exists in singular totality like the universe is real. Talking about the universe, one would obviously know that it is the summation of the planets, stars, space and everything else that c onstitutes this. This meaning does not cover reality exhaustively and thus the need for another reality theory which is reality 2. Reality 2 is what someone experiences out of reality 1. Every person has what he thinks or he experiences as a result of the totality of what is real. Since not even twins can have the same experience, thus reality according to this theory, is what everyone knows or believes in. it means that there are multiple realities since every person will experience something different from his friend. It is thus possible that reality in this case is divided and different among different classes of people like the poor and the rich, men and women, children and adults. Every group has its own reality. Multiple Realities is thus what a person thinks; it is thus brought about by one’s consciousness. The sole thought of individuals. This is what has generated the world’s illusion on history, sport, art, wars, pleasure and the like. Reality is brought abou t by the conscious mind of an individual and what he or she strongly believes in. Monism theory; this is a reality theory which talks against pluralistic or dualistic view of reality. Monism holds that, there has to be unity in any field of analysis, for example, the existence of God. Monism holds that there is one supreme God  but he manifests himself in many ways according to different religions.   Reality according to this theory holds that for anything to be real, it must consist of an amalgamated whole thus everything that exists can be attributed or illustrated using a single model. From Monism theory it can also be concluded that there is one earth but according to different people, many have diverse understanding of what it is or what it looks like. Likewise, the matter and the mind are formed or emerge from same principle or substance. Monism is further categorized into; idealism, mentalistic monism and phenomenalism. Dualism; it holds that reality is constituted by an unchanging whole. Change for this case is considered as just a mere illusion. Dualism does not give room for any change, reality is thus unchanging and it remains to be unified as one. Reality is thus specific, there can not exists two realities at a go, something is either real or not real. Idealism; this is an epistemological theory which holds that reality is attested when the datum or an object of realization are identical. Reality is thus what is

Learning about DSM-IV TR Multiaxial System Assignment

Learning about DSM-IV TR Multiaxial System - Assignment Example Therefore he tells them that they should not make his penalty a light one. Father Gabriel takes Mendoza’s arsenal and has them linked in a satchel. He then connects the satchel across Mendoza’s hips. Though thoughtful, he delivers Mendoza to go up the Iguazu drops over and over again. Mendoza, bitter but extremely proud, refuses to take support and continues with the climbing of the drops. He lastly breaks and yowls out to God. One of the monks makes an effort to launch him from the struggling by untying the satchel from his hips so that he gets released from his penance. Mendoza however, reties the satchel. He states that he does not search for absolution from the clergyman but rather from the tribe. On this event, one group participant comes and reduces the satchel. He gets released from his penance. To indicate the tribe’s absolution, the shield gets tossed to the drops. Mendoza continues to create vows of chastity, hardship and behavior. He then becomes a Jes uit and gets approved by the same Indians he used to kidnap. Rodrigo Mendoza is first brought forth as a retched and ruthless man who oppresses the natives in a land where he himself is but a visitor. He kidnaps the natives and sells them to other rich retched farmers without any regard to the natives’ future or even to how the relatives of the kidnapped native will cope. He therefore gives out a negative aurora and causes great unrest to the native tribe. We learn that Rodrigo has a brother by the name Felipe Mendoza and a fiancà ©e called Carlotta. Rodrigo Mendoza shows a complete reverse of the previous personality depicted earlier. He shows great love and concern for the two. This is a complete flip of his attitude towards the rest of the tribe. These two additional individuals are included in order to compare the two that Rodrigo Mendoza shows. As much as

MAKING HEALTH CARE SAFE Article Example | Topics and Well Written Essays - 500 words

MAKING HEALTH CARE SAFE - Article Example Using of computers and other communication devices like tablets is gaining popularity in recording vital information on diagnosis, prescription and general recovery progress of the patient. This is equally important in helping healthcare officer to communicate and exchange ideas on the most appropriate ways to minimize mistakes on patient care. Use of modern technology in observing the various changes in patient condition like pulse rate, blood pressure among others have helped reduce cases of misdiagnosis and improve the speed, timeliness and accuracy of patient charting. In the next 10 years there is a brighter future in health system safety and technology as far as patient care and elimination of errors are concerned. Nursing practice is likely to shift much dependence on informatics as an integral part of the quality healthcare improvement policy. This means that as a nurse, one will have to emphasize on the recording and analysis of data concerning the health history of the patient for sound decision making when it comes to critical situations. Communication techniques is likely to take Centre stage in the future nursing practice as this is critical in reducing widespread cases of mistakes that have cost patients their lives in the hands of healthcare providers. There is an increasing training of nurses on how to collect data and record electronically for use in analysis the progress of the patient towards recovery so that interventionary decisions may be done with accuracy and precision. Reliance on data and information will improve co-ordinatio n of various healthcare provision activities which sets stage for an increased technology based nursing practices. The assertion of Gibson and Singh concerning the improved application of informatics in the current healthcare provision holds. The cases of mistakes when caring for the patients

Project Management tools Assignment Example | Topics and Well Written Essays - 1000 words

Project Management tools - Assignment Example Quantitative measures are most commonly accepted because of ease of measurement. Surprisingly, Clements and Gido (2010) make no mention of KPIs, although they mention the project objective which should be clarified at the outset and may be defined in terms of scope, schedule and cost (p.115). Cox et al’s (2003, p.148) six significant indicators are quality control; on-time completion; cost; safety; cost (in dollars) per unit placement and units completed/placed per man-hour worked. Of these, only safety is qualitative (p.144). Yuan et al (2009) investigated KPI selection in public-private partnership projects and identified the top five priorities for different stakeholders: STAKEHOLDER GROUP Academia Private Sector Public Sector General Public OBJECTIVE RANKING 1 Acceptable quality of project Acceptable quality of project Acceptable quality of project Acceptable quality of project 2 Quality public service Life cycle cost reduction Within budget or saving money in construction and operation Quality public service 3 Within budget or saving money in construction and operation On-time or earlier project completion Solving the problem of public sector budget restraint Provide timelier and more convenient service for society 4 On-time or earlier project completion Within budget or saving money in construction and operation Transferring risk to private sector Satisfying the need for public facilities 5 Satisfying the need for public facilities Quality public service Quality public service On-time or earlier project completion Table 1: Top Five Objectives in Different Stakeholder Groups (Source: Yuan et al 2009 p.263) These findings confirm those of Cox et al (2003) in terms of quality, cost and on-time completion, but safety, cost per unit placement and units completed/placed per man-hour worked are missing. In so doing, these findings also confirm the importance of the perception from which the judgment of KPI utilised is made. (250 words, excluding table) Fl exible Work Breakdown Structure for Integrated Cost and Schedule Control Youngsoo Jung and Sungkwon Woo Jung and Woo (2004) introduce the concept of a flexible work breakdown structure (WBS) with standard classification codes to reduce the amount of data requiring control. Their argument is that â€Å"integrating cost and schedule control functions provides an effective tool for monitoring the construction process† (ibid, p.616) The implication of their approach is they are using a task-driven planning process. PRINCE2 (OGC 2009) takes a product-based approach, focusing on what needs to be done, rather than the individual tasks that need to be done. The argument is that â€Å"the set of agreed products defined the scope of a project and provides the basis for planning and control† (ibid, p.14). The product-based approach is used by Rad and Cioffi (2004) in proposing the use of both work and resource breakdown structures to enable more accurate costing with task duratio ns and activity estimates. They identify the WBS as a roadmap for such things including work definition, cost estimates and expenditures and time estimates and scheduling. The ultimate goal of the WBS, for their purposes, is to â€Å"highlight[s] a logical organisation of products, parts or modules ... associated with each element of the WBS†

Nursing theory application paper Parses Human Becoming Theory Essay

Nursing theory application paper Parses Human Becoming Theory - Essay Example The parent of bay AB was distraught of the news. The next couple of days were a time to observe the patients reacting from the different procedures to keep her alive. But the baby got worse and even developed subclinical seizures on continuous encephalagram and was decided to be placed under a pentabarb coma. After a week, physicians attending to the baby saw progress because of adjusted medicines and a more positive eeg results. The team of physicians attending to baby AB decided based on the positive results of the eeg and brought the baby out of the coma. During the patients rest towards recovery in the open heart unit, the neuro and airway status was continuously monitored. One realization during the case is that the patient’s family is another set of patients to be looked upon. Baby AB, given her sensitive and delicate case must be given all the necessary attention and care. The family must is taught of the feeding techniques through g-tube and how to monitor the signs of seizure and respiratory distress of baby AB. Fortunately the family has a very strong faith and believed in the approach if giving utmost importance to baby AB’s condition. Philosophical underpinnings of the human becoming theory Palliative care focuses on quality of life and the life of both the patient and his or her family. Given the sensitivity and serious condition of the patient, giving care to the patient does not only rely on the attending physicians and nurses on the case. But rather the medical team must also encourage support and assistance to the family who will be taking care of the patient and giving their 24 hours care for the patient. In relation with the case specified about, the theory under study that analyzes and is connected with this case is Parse's human becoming theory which focus on the humanly experiences of health that constitutes a process of becoming one with the universe and other entities in it. Parse's human becoming theory has its roots used as a nursing theory in the continental human science tradition. As a resolved theory that uses Parse's own experiences as a nurse, influence of Roger's conceptual system of nursing, and other tenets of existential phenomenology, the theory provides a theoretical system that explains how human beings is viewed as the expert and knowledgeable of his or her own health. The human becoming theory is an alternative theory that is presented by both conventional bio-medical approaches with biological, psychoanalytical, social and spiritual aspects. The theory focuses the personal quality of life as a goal in the nursing practice. The assumptions of this theory were synthesized from the works by European philosophers, Heidegger, Sarte and Marleau- Ponty together with American nurse theories influenced by Rogers.(Cody) Concepts and propositions of the theory The human becoming theory has three main themes or concepts. The first one is meaning. Meaning being the first principle of the theory relates that structuring multidimensional meanings is co- creating reality through the expression of value and image.(Parse, 1998) To simplify this concept, there is the principle that people participates in creating what is real for them through choices and self-expression of the values in their life and how they will implement the

Global Degradation of Coral Reefs Essay Example | Topics and Well Written Essays - 3000 words

Global Degradation of Coral Reefs - Essay Example Coral reefs are productive ecosystem and diverse habitats in the world because of their economic and social importance including food provision, tourism among others. There is a high rate of global degradation of coral reefs and these calls for their sustainable management. Their reduction has fueled the local and international communities to come up with approaches of monitoring coral reefs. Ecology involves the study of organisms in the environmental surroundings which require spatially accurate data given the distribution of spices. In the past manual and field observation methods were used to gather ecological information. These methods were labour intensive and time consuming. As a result, remote sensing became widely incorporated in the ecological duties because of its large coverage, cost effectiveness and accuracy. This called for the venture into new technologies to enable easy and faster access of remote sensed information in the management and monitoring of ecological spec ies. (Knight, D., E. LeDrew, et al. 1997). Coral ecosystem is one of the important habitats in the world. Coral reefs play a significant role in checking the amount of carbon dioxide in the sea. Without them regulating the level carbon dioxide in water could be difficult and many species on earth including human being could be at a high risk. Although, that is the current situation in the world because people have destroyed the reefs due to the level of impurities in the water bodies this has resulted in global warming. They are also a habitat to millions of fish species, source of employment, food provision, tourism attraction sites and protect the shores fro waves. In short they are source of livelihood to millions of people around the globe (Goodman, J. A., M. Velez-Reyes, et al. 2006).This paper addresses landscape remote sensing approaches of mapping coral reefs. Discussion By 2100 coral reefs will be degraded if no measures are taken. They only cover 2 percent of the total ocean area and annually they provide a home for almost 33 percent of thousands on marine species. As mentioned above, coral reefs are threatened by a number of factors. For example, coral diseases resulting from ruining the reefs, coral reefs can be in danger of water related coastal development as it is in the case in the Caribbean. (Gledhill, D. K., R. Wanninkhof, et al. 2008). As a result of a variety of biological species in the coral ecosystem, over fishing can also be harmful because they interact and depend on one another for food and competition. Harvesting of coral reefs can be classified into controllable, Malthusian-over fished and poisonus.Studies show that reduction of species in the coral ecosystem can lead to prolification of algae. (Manus, J. W., L. A. B. Menez, et al. 1999).In response to this damage a 5 year project was launched and it was funded by the centre for s ponsored coastal ocean research (CSCOR).The research key provisions were to provide adequate data on coral reefs, tool and approaches to help marine scientists and identify phenomena that caused the degradation of coral reefs. The research addressed four major areas namely; interaction between water related activities and coral reefs, causes of biological pressure, assessment of marine protected areas and the overall nature of coral ecosystem (Hallock, P., B. H. Lidz, et al. 2003). Researchers

Police Brutality Research Paper Example | Topics and Well Written Essays - 2000 words - 1

Police Brutality - Research Paper Example Through print media, the judiciary, activists, police and the citizens are able to voice their opinion surrounding the incidences of police brutality and killings. The victims of these police unethical behavior are targeted minority groups from African American, Hispanic and minor racial groups. Featured mostly in the New York Times and MSNBC, journalists have been able to uncover the underpinning reasons and surrounding circumstances behind the harassment of police among citizens. These brutalities and killings are influenced from issues such as racial chasm, mental instability, superiority complex and societal conceptions of the minority groups by the police. Few weeks ago, a Caucasian police officer shot a twelve year boy in Cleveland, under the presumption that he was carried a real pistol. This was after someone’s 911 alarm to the police. However, following the procedural clause of police action towards a suspect, the police officer took the law into his hands by pinning down the boy. Neighbors have until now kept protesting against the professional conduct of the police, based on the new revelations that the police had earlier on been suspending after the positive results of his mental state. However, following the handling of the case by the judiciary in Cleveland and responses from other police superintendents, police brutality, harassment and killings are a passive phenomenon, giving police the autonomy of action, based on their status and role of maintaining law and order. As reported by Oppel 2014, new revelation surfaced the investigation of the 2-second time frame which the police officer used to kill Tamir Rice (Oppel, 1).

Customer Relationship Marketing in Action within the Retail sector Coursework

Customer Relationship Marketing in Action within the Retail sector - Coursework Example Quality of customer service is central to service marketing, which is possible through CRM. Quality of customer service can be enhanced when trust, commitment, communication, empathy and conflict handling are given importance in relationship building. These become important because relationship quality has significant influence on customer loyalty (Prasad & Aryasri, 2008). CRM is also about acquiring the right customer and not all customers. This is justified because 80 percent of sales are derived from 30 percent of the customers (Hawkes, 2003). Apart from identifying high value customers, CRM is also about managing the entire lifestyle of customers (Lambe, 2001). Retailers have to look beyond the transactions of the customer. It is equally important to derive information on how the customer became the customer as well as the interactions surrounding customer’s departure. These would help the retailers to better retain customers. Knowing of their life style implies that CRM s hould be able to anticipate and predict the future needs of the customers Suitability and effectiveness of CRM strategy of Tesco and Sainsbury Tesco’s Club card scheme generated information on pricing, customer services, merchandizing, promotions, media effectiveness, customer acquisitions and communications (Hassan & Parves, 2013). ... Their tesco.com is also aimed at keeping in touch with their customers. The Nectar card scheme of Sainsbury is aimed at attracting more customers by having increased number of partners (Hassan & Parves, 2013). Sainsbury customers redeem their loyalty points and the retailer experienced the highest number of Nectar card users during Christmas 2011. Such redemption enabled the retailer to understand the potential customer base. Sainsbury also has a strong presence on social networking sites such as Facebook and Twitter. Sainsbury gathers information on customer experience which is lacking at Tesco. Both Tesco and Sainsbury have loyalty cards aimed at retaining customers. Boedeker (1997) however, contends that loyalty cards are based on the assumption that special offers and bonus points would be the only reason that customers would not deflect. Economic aspects are only one of the benefits that consumers seek. A study by Turner and Wilson (2006) found that customers at Tesco may be sho pping more because of Tesco Club cards but they do not feel more valued because of these cards. This undermines the very purpose of CRM as no relationship has been built. The success of loyalty cards is not limited to enhanced sales or profits. Their card only promotes incentivized loyalty and no emotional loyalty has taken place as customers are not influenced by brands. Hassan and Parves also found that loyalty card holders at both Tesco and Sainsbury do not limit their shopping only within these two retailers. Possibly this could be because of weak value proposition and flawed design of the loyalty cards (Bayraktar, Yilmaz & Yamak, 2010). Also, the companies may not be able to analyze all of the data generated through

Role Of A Nursing Faculty Member Essay Example for Free

Role Of A Nursing Faculty Member Essay Introduction The basic role of a nursing faculty member is to teach nursing skills to students effectively. The knowledge, skills and values acquired by the learners must be put into clinical practice. It is therefore the duty of the faculty member to impart practical skills to the students. There has been a debate on the most suitable method of teaching clinical medicine. Most arguments have shown that the effectiveness of the clinical teaching is determined by the end results. Teaching being a skill it requires specialized strategies for its positive desired end results. A faculty should be organized in hierarchy to enable proper allocation of duties; therefore the roles of the faculty member are very diverse and practical. ROLE OF A NURSING FACULTY MEMBER The aim of teaching is equip a student with knowledge and skills that are consumable. A good education program is deemed to be the one is able to satisfy both individual and societal needs. The changes in health care delivery systems, demographic trends, technological advances and developments in higher education influence the competencies needed for professional nursing practice. (Garberson Oermann 2007) The main developments in the teaching of nursing allude to the philosophical perspective in which the program goal and objectives based on the content are developed followed by the teaching evaluation process. The current strategies of teaching nursing focus much on the end results as such there is more focus given to an individual’s needs, learning activities, learning style, which has improved the quality of the end results. In a situation where teaching is based on the end result, the faculty member then should commence the teaching by identifying the end results rather than the intention of the teaching. Some of this en d results expected after the teaching process include knowledge, skills, professional attitudes behavior and values. Good clinical learning activity is achieved by enabling the students to be able to transfer acquired knowledge into real life situations. The knowledge (theory) acquired should be put into practice. Researches geared toward curriculum reforms are very important to a nursing faculty member in order to accommodate the fast changes in health are important. Nurse teachers should focus on giving students tangible skills based on facts. The ability to solve clinical is an important recipe to clinical teaching and learning. Most of the clinical problems require the student to be creative this necessitates the teacher to equip the student with necessary skills on how to solve practical new clinical problems according to the context. Therefore essentially critical and creative skills mind is in order to be abreast with the current challenges in health care that will help one work more effectively in the real life situations. The care services should spread evenly within a particular environment this is in the view that medical has grown to be a very vital service to be offered to people of all calibers in the world. PREPARATION NEED FOR THE ROLE The nursing faculty member and students in academic nursing must choose a healthy learning center to assist in acquisition of practical skills. The teacher therefore is expected to assign duties and responsibilities to the students within a given period of time. A faculty member should put in place different roles important in guiding the students in their learning activities. The major of the teacher is to empower the students with skills within and outside the clinical context that will enhance delivery of quality services to patients. Proper planning of the clinical activities requires a teacher to have more knowledge. A nursing faculty member should be able to organize the students into groups in order to improve the guiding of the cognitive skills that are crucial for problem solving. Typically students’ utilization of resources increases with the implementation of problem-based learning as students are challenged to research answers of learning issues. Resources for information include faculty experts, consultants, text, journal and a computerized data retrieval system as well as field and clinical experience. Lowestein and Bradshaw (2004). The subtler role of a nursing faculty member is to monitor the  Ã‚   learning atmosphere. The students acquire clinical skills positively this nurtures them towards working independently. Research has shown that when one works independently is likely to double the skills in the field specialized (DeYoung, 2003). The outcome of should be able to reflect need oriented especially the needs of the patients should be give priority. Evaluation is a very important criterion for establishing the knowledge and competence acquired by the student. Therefore suitable criteria for evaluation should be established and feedback given appropriately after each evaluation. Problem solving strategy has been found a very helpful learning strategy among students as it gives maximum outcomes. For a nurse to acquire necessary clinical expertise in understanding the multiplicity of factors that interplay in a give situation, the must impart research based techniques in a student. This can be done through giving the student  Ã‚   research tasks to be done especially those relating to patients. The implication here is that the student will have the opportunity to integrate the knowledge learnt with the past and present experiences and use it to solve anything new in future. A faculty member may be involved in clinic care activities in the process of ensuring quality assurance. In this event the teacher is acting as a role model to the students. There are diverse roles of a nursing faculty member among them include: administration, nursing education program course coordination conducting research and serving as a consultant among other functions (Gaberson, Oermann, 2007). Therefore the understanding of situation of clinical learning activities start with proper preparation in the part of the teacher, this is usually achieved by setting goals and objectives to be achieved. The goals and objectives determine the methods to be used in teaching process.   The teacher should be able to evaluate the extent to which a particular student is prepared before being assigned a duty to execute especially when they given a private client to attend to in the assigned clinical duties (Barnum, Karlene Kerfoot, 1995). Conclusion The nursing faculty member should equip the students with theoretical skills that can bring about positive learning process and the desired outcomes. The knowledge imparted on a student should have utilitarian value on an individual, the knowledge should enable them impact their patients positively. The roles that the nursing faculty member does are beneficial to the institution as well as the student. Positively the faculty member gives care services to the patients what might be called in-service function. It should be noted that nursing is a labour intensive activity, which requires commitment, it requires a 24-hour ongoing service and as such individual should be prepared to face this challenges appropriately. References: Arlene J. Lowestein, Martha J. Bradshaw. (2007) Fuszard’s innovative teaching strategies in  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   nursing. Jones Bartlett publishers. Barbara Stevens Barnum, Karlene M. Kerfoot (1995). The nurse as executive   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   Aspen publishers. DeYoung, S. (2003). Teaching strategies for nursing educators. Upper Saddle River, N.J.: Prentice Hall Health. Kathleen B. Gaberson, Marilyn H. Oermann. (2007). Teaching strategies in nursing. Aspen publishers.

Advantages Of Unit Banking Essay Example for Free

Advantages Of Unit Banking Essay 1.Local Development:Unit banking is localized banking. The unit bank has the specialised knowledge of the local problems and serves the requirements of the local people in a better manner than branch banking. The funds of the locality are utilised for the local development and are not transferred to other areas 2.Promotes Regional Balance:Under unit banking system, there is no transfer of resources from rural and backward areas to the big industrial commercial centres. This tends to reduce regional in balance. 3.Easy Management:The management and supervision of a unit bank is much easier and more effective than that under branch banking system. There are less chances of fraud and irregularities in the financial management of the unit banks. 4.Initiative in Banking Business:Unit banks have full knowledge of and greater involvement in the local problems. They are in a position to take initiative to tackle these problems through financial help. 5.No Monopolistic Tendencies:Unit banks are generally of small size. Thus, there is no possibility of generating monopolistic tendencies under unit banking system. 6.No Inefficient Branches:Under unit banking system, weak and inefficient branches are automatically eliminated. No protection is provided to such banks. 7.No diseconomies of Large Scale Operations:Unit banking is free from the diseconomies and problems of large-scale operations which are generally experienced by the branch banks. 8.Easy Management and Control:Under unit banking system, it becomes very easy for a single office to manage and control efficiently. 9.Close Management and Workers Relationship:Under unit banking system, there prevails a close and cordial relationship between employer and employees. 10.Quick Decision:The owners or the management of unit banks can take quick decision and prompt action in times of emergencies. 11.Use of Local Resources:Local financial resources are used for local development. 12.Lesser Fraud and Irregularities:Due to the less scattered affairs of the bank, there are very little possibilities of fraud and irregularities. Disadvantages Of Unit Banking: 1.No. Distribution of Risks:Under unit banking, the bank operations are highly localised. Therefore, there is little possibility of distribution and diversification of risks in various areas and industries. 2.Inability to Face Crisis:Limited resources of the unit banks also restrict their ability  to face financial crisis. These banks are not in a position to stand a sudden rush of withdrawals. 3.No Banking Development in Backward Areas:Unit banks, because of their limits resources, cannot afford to open uneconomic banking business is smaller towns and rural area. As such, these area remain unbanked. 4.Lack of Specialization:Unit banks, because of their small size, are not able to introduce, and get advantages of, division of labor and specialization. Such banks cannot afford to employ highly trained and specialized staff. 5.Costly Remittance of Funds:A unit bank has no branches at other place. As a result, it has to depend upon the correspondent banks for transfer of funds which is very expensive. 6.Disparity in Interest Rates:Since easy and cheap movement of does not exist under the unit banking system, interest rates vary considerably at different places. 7.Local Pressures:Since unit banks are highly localised in their business, local pressures and interferences generally disrupt their normal functioning. 8.Undesirable Competition:Unit banks are independently run by different managements. This results in undesirable competition among different unit banks. 9.Limited Size of Operation:Unit bank business can not be operated on large scale because of its limited area. Being the small organisation, division of labour can not be applied. 10.No Economy of Reserves:Under unit banking, bank can not transfer its funds to any other branch. So economy in cash reserve can not be secured under this system. 11.Limited Financial Resources:A unit bank has limited financial resources so it is not able to provide full and adequate banking facilities to the industry and trade of the area. 12.Investment of Idle Funds:A unit bank having no other branches, can not utilize its idle funds in profitable ways.

Use Of Light Alloy Materials In Aircraft Construction Engineering Essay

Use Of Light Alloy Materials In Aircraft Construction Engineering Essay Q1. Evaluate and Analyse: The use of light alloy materials in aircraft construction. Aircraft construction involves the use of various alloys including titanium alloy, magnesium alloy and aluminium alloy. Titanium alloys are useful in parts of aircraft that need to be of high resistance against heat. This alloy is usually used in turbine engine blades, tail pipe casings, and engine firewalls. The alloy is also preferred more for construction of high speed aircrafts. This alloy has melting point of around 13000 C to 14500 C (Huang, 2004). This alloy is useful for aircrafts that are built for fighting purposes. Cutting of alloys of titanium and magnesium results in generation of; sparking at normal instances. These are not easy to cut down. Therefore, parts of aircraft that need to cut down at any moment in the future, do not make use of these two alloys. Magnesium alloy is best suited for strengthening of brackets all across the aircrafts, turbine engines for compressor casings, piston engines crank cases, and brackets of engine mounting (Anyalebechi, 2005). This alloy melts at a temperature ranging from 7000C to 8000 C and burns at a temperature higher than this (Huang, 2004). Aluminium alloys on the other hand are of quite less melting point and are easy to be cut down. Therefore, these are best suited for aircraft parts that need not be too tough and can be cut down as and when required. Alloys of magnesium are preferably used in construction of aircraft due to their nature of being light weight resulting in cost reduction on consumption of fuel and air pollution. The stiffness and strength of magnesium alloys is quite lower at the temperature of around 1500 C (Greger et al., 2007; Kielbus et al., 2007; Dobrzanski et al., 2007). These characteristics act in favour of the alloy and raise its demand in the construction work of aircrafts. This alloy is highly acceptable due to its strong nature of material ability leading it in favour of the alloy and increased demand of this material to suit the needs of the industry. The use of composites in aircraft construction. Composite materials are quite widely used in todays times for the construction and development of modern aircrafts. Even these can be used to retrofit to aircrafts that become old. The composites are developed by using MMMF (Also called as Man Made Mineral Fibres) to make it a durable and strong material for construction purpose of aircraft. These materials are more used for construction of wheel bay doors, engine cowlings, cabin floors, and control surface. However, these materials are not good for those who locate around the aircraft during wreckage conditions. The material of aircraft at certain instances require good ratio between strength and weight, i.e. the ratio has to be high enough (Anyalebechi, 2005). The nature to fabricate satisfies this need for aircraft construction and development. Bonding materials are used for development of these composite materials. Therefore, these are best suited to prepare majority of parts of an aircraft. Because of this reason, composite materials are in huge demand in present days for construction purpose of normal aircrafts. The materials are also durable and because of this nature of durability, the parts of aircraft suit best for these. However, there are situations when there is the need to cut the material while carrying on the construction work. At such instances it becomes important to make use of these materials for parts that are hard enough to keep the aircraft safe against risk situations. With the change in thermal value of a composite takes place, it generates thermal stress on the body, which is due to the disturbance created. Composites are made up of thin sheets and fibres are stated in lines within the sheet therefore for making use of composite, these shall be in the form of layer (Olsen, 1986). For construction work, aircrafts ends that need to be constructed by moulding material, composites are well suited. One can also manipulate physical properties of the material by introducing some orientations in between the layers of fibre (Olsen, 1986). Analyse/Compare the choice of use made in a b above. For the construction of an aircraft, it becomes important to focus on the quality of material used. The material used shall be of high strength first of all. This is necessary to ensure that the aircraft is strong enough and can stand well. However, there are chances that the aircraft due to this factor becomes quite heavy and in turn requires huge force to fly it due to high degree of stress over its wings. The tensile strength of devices shall be strong enough in aircraft. However, at present times the aircraft construction has migrated towards the use of composites of high strength (Wireless News, 2005). At normal instances, graphite composites are used for construction of aircraft wings, which does offer high degree of strength. The density of these composites too is quite high. Therefore, the composite of this type results in quite a well defined value of strength to weight ratio. Figure 1: Change in coefficient of thermal expansion due to change in temperature. Source: Huang, 2004 From the above we can note how the increase in temperature affects the value of coefficient of thermal expansion for the composites of aluminium alloys. Higher the temperature of surroundings, higher is the risk of melting of material used for construction work. Therefore, it becomes crucial to use materials based on the need, else there can be chances of accidents for these devices. There are always risks of fire and other accidents in the environment for aircraft industry. Alloys and composites are however, not possible to be used alone for the construction of an aircraft. Depending on the requirement, both of these shall be made use of instead of just depending on either of the materials. Therefore, before the construction to take place, it shall be clear enough in mind to know the requirement and basic needs of each of the parts. In this case, the situation becomes favourable for aircraft resulting in production of a strong and safe aircraft. It is noted that composites of graphite outperform the value of metal alloys of common nature for constructing any wing. The strength of graphite composite is higher as compared to that of steel too. The stiffness range is quite varied up to the minimum value of AA6061- T6. Therefore, the composite, on comparing with aluminium, has high stiffness. In addition, these composites can even be stiffer as compared to mild steel. Composite materials are therefore a preferred choice in present times due to their high degree of stiffness and strength. These materials can be used in quite a large number of parts of an aircraft resulting in increased demand for construction work of an aircraft, as compared to that of alloys (Anyalebechi, 2005). Depending on the requirement for construction of any part of the aircraft, it becomes crucial to make use of the material that suits best to the need. Some of the parts of aircraft demand the use of strong material, whereas others do not need high tensile strength. Parts of aircraft such as wings require ability to be safe against high temperature conditions, whereas other parts such as cabin and floor need to be durable enough to make a good quality of aircraft. Therefore, composite materials such as graphite composite are quite suitable for construction of wings while other parts can be made using alloys of aluminium. Q2. Investigate and Evaluate: Why the correct identification of aircraft spare parts is critical to the safety of aircraft. Aircraft carries hundreds of lives at risk in the sky. A minor mistake can result in huge losses of life. Therefore, it becomes quite important to properly evaluate the safety features of aircrafts spare parts. Fire is amongst the most risky hazard against aircrafts, whether they are for military, civil or commercial purpose. Fire while in flight is considered as 4th highest hazard that arises due to accidents in jet aircrafts (Boeing, 2005). This shows the risk of fire as quite notable ones. FAA (Federal Aviation Administration) had argued that if no proper measure is taken and the rate of occurrence of accidents in aircraft taking place due to fire continue at same rate, the increase in demand of air traffic would further increase death due to fire by 4% annually (Federal Aviation Administration, 2006). If no proper measures are taken then the risks are probable to increase more and more. Polymer composites reinforced by fibre are increasingly used in todays scenario and is a serious point of concern, because these composites are more risky against fire. These materials produce heat and smoke, which cause serious damage against livestock. Therefore, it becomes important to properly evaluate the risk features against aircraft and associated fire hazards. Aircraft manufacturing companies take due care for construction of aircrafts with proper safety standards. Aircraft parts at both of its sides may look similar, but there are possibilities that they are a bit different then each other. This can result in high risk of functionality making it unsafe for use. While building an aircraft, it is important to look at each and every part of aircraft and adopt proper measures for pilot testing of finished aircraft. Construction Company for aircraft shall make sure that right parts are used in construction work. Although there are number of parts of aircraft, ones that are safer are preferred ones. Thus, the parts that are durable in nature shall be the better choice for construction. In case, risks due to flaws in aircraft spare parts are not identified at the right time, it may result in huge loss of lives. There is huge sensitivity risk in this industry due to the reason that a minor mistake can be quite dangerous for mankind. For evolutionary stages of construction work, it shall be properly taken care of. There should be testing efforts made for individual units of aircraft, as this strategy can help in finding out the mistakes thoroughly. Studies conducted by Li (1994) long ago also had explored the concept of risk of accidents in aircraft due to one or the other reason in its spare parts. He suggested cohort study as an important method to alloy complete investigation for the aircraft and its associated risks (Li, 1994). Therefore, cohort study shall take place to find out the weaker parts of an aircraft and work towards improvement of these sections. If one finds out any particular region is not of enough potential and strength, steps shall be taken to make it a stronger one with greater tensile strength. At such an instance the use of graphite composite can be a good selection due to high strength of this material. Also the measures shall be taken to find out the sections of aircraft that are prone to creep down or shrink in high temperature conditions. This can further lead to void of wings skin, which is a notable point of worry at all the situations, else there are always the risk of breakage of these materials in the sky due to change in pressure and other conditions of air in that situation. The measures at such instance can lead to a safer stand for the aircraft and therefore would increase the safety of people using these services. Evaluate an example of a safety incident due to incorrect spares. Safety has always been an important point of concern for safety of humanity. People living in this technological era are continuously faced with one or the other risk. There are situations when the aircraft parts are not used properly or there are shortcomings in the quality of spare parts used for construction of an aircraft, which result in huge losses. There are also the situations that involve illegal trade of spare parts that cause danger situations. There has been quite a number of bogus parts usage found in the aircraft industry at various instances. These were fifty two in number during 1991 and increased to more than three hundred by the end of year 1992 (Wolmar, 1993). This represents an increase in risk of aircrafts due to incorrect use of parts for construction work. These faulty parts lead to loss of quality and stiffness of aircraft. Same was the condition that occurred in South West part of USA when The discussion here is done of crash that happened on 10 July 2006 of Fokker Airplane. This F27 plane production had started since year 1955. Initially the development work was done more for less seating capacity of aircrafts. However, with the passage of time, its strength has increased. The company was doing well in its industry though; the accident that took place in July 2006 completely changed the scenario. The aircraft was constructed in the year 1964. The airplane flew successfully on 24th January 1964 for the first time in France. This was then sold to All Nippon AW and then to TAT and then to PIA. The plane served well till 10 July 2006, when the crash happened. This was the crash that changed the perception of individuals towards the airplanes. People had increasingly feared of using this mode of transport due to its associated risks. This accident was 66th in the world for aircraft industry whereas in Pakistan, 8 accidents took place before this (High Court Bar Association, 2011). The aircraft F-27 was quite appreciated in Europe due to its economic benefits, however the materials used in its products increased its inherent defects, resulting in a crash finally in the year 2006. Though the aircraft had served well for quite a long duration, the negative results were finally obtained. The manufacturer of this product had to suffer for bankruptcy due to this accident. Anthon Herman Gerard Company located in Holland was bought to an end finally after the accident. The vendor of this aircraft construction company was working on spare parts that were not approved. Because of this step, the life of individuals had to suffer a lot. Thus, the humanity got endangered due to this mistake. Rapid occurrence of accidents had resulted in numerous accidents in Europe because of which the people protested against aircrafts thereon. This lead to introduction of safer aircrafts with assured quality of construction material used. There had been several problems found in technical operations of the aircrafts. Main issues of concern have always been the use of air safety features and spare parts used in aircraft construction. Therefore it becomes important for engineers constructing aircraft to assure that there is no weak section in the aircraft due to weak quality of materials used. Mentioning the list of important spare parts is not enough, but there shall be due care of the parts used for each of the shelf. This gives greater strength to the aircraft designed. The accident of Fokker aircraft had occurred mainly because of the non usage of genuine spare parts for maintenance and the operations had been carried on by locals instead of using certified engineers and organizations and humanity had to pay for this.

The Destructive Power of the Media Essay -- Argumentative Persuasive T

The Destructive Power of the Media      Ã‚  Ã‚   I have the most adorable little cousin named Alexandra, whom I love with all my heart. One day I was very disturbed when she told me that she was fat. She was 4 years old at the time. I was stunned and had no idea what to say to her, so I just told her that she is a healthy little girl and that she needs to not to worry about that. I tried to think of where she would come up with this thought, and after a while I remembered a conversation that her mother and I had. We were talking about how nice it was when we were younger and we did not have to work at being thin. Her mother said something about being fat and Alexandra must have been listening. This got me thinking about how I came to be self conscious about my body. I came to the conclusion that it is just something that every woman has to go through at least one time in her life. But why, what is it that makes every woman want "the perfect body?" I pondered this question for a while, but I was baffled. Later that day I began to read the "Cosmopolitan" and I began paying attention to the advertisements in this very popular woman's magazine; I was amused at the angle the advertisers use to try to get women to buy their product. One advertisement was for an alcoholic drink called Tequiza. The advertisement compared the calories and the fat content of that drink to the calories and fat content in another popular alcoholic beverage. I am under age, but I am a college student so I will not lie and say that I do not drink on occasion, but when I do drink I do not worry about how much fat or how many calories I am taking in. To me this advertisement was completely ridiculous and instead of making me want to buy the product I have now vowed... ... by showing us how happy it will make us. They shape our culture by telling us that we want to be married because the people advertisements are and they are incredibly happy. They also shape our culture by setting the standard for the way we look. All women at one point in their life are self-conscious because they do not look like the models in advertisements. Advertisements are the reason why women obsess about their weight and the way they look. I do not know about most people, but I do know that I do not want to live in a world where advertisements tell me what I want or how I should look.      Works Cited    "Super Bowl Clutter." Editor & Publisher. Vol. 127, Issue 6 (1994): 6. Signorielli, Nancy and Douglas McLeod. "Gender Stereotypes in MTV Commercials: The Beat Goes On." Journal of Broadcasting & Electronic Media. Vol. 38, Issue 1 (1994): 91.

Symbolism in Arthur Millers A View from the Bridge Essay -- essays re

In Arthur Miller’s tragic drama, ‘A View from the Bridge’, we see that the bridge itself is a symbol of the linking of two cultures, Italian (namely Sicilian) and American (namely New York), whereby the manifestation of these two cultures dwell in Red Hook, Brooklyn. Despite this, differences between the two are distinctly evident from page 17 to 18, and it is the purpose of this essay to discuss how Miller conveys these differences in the given pages. Miller uses language effectively in this play, his use of dialogue, of which makes up the bulk of the drama is his main tool in conveying the large cultural differentiation between Red Hook and Sicily. We know only of Sicily by the way in which Marco and Rodolpho describe it, similarly we do not get to see all of Red Hook (the composite set is all the audience sees) yet we know how it is by the way players talk about it and how they interact with each other within the community. Marco is the first of the two immigrants that enter the Carbone household to shed light on the differences between Sicily and Red Hook, when asked if he had...

Certainty is Decartes Discourse of Method Essay -- Rene Descarte Pape

Rene Descartes' overall objective in publicizing "Discourse of Method" is to developing a new system of knowledge that is free of prior prejudices for establishing the truth of things. In Part 4 of the book he explains the philosophical basing (the meditations) for establishing the new system. These meditations were based on the epistemological theory of rationalism: that is if someone truly knows something then they could not possibly be mistaken. He goes on to provide solid argument for his ideas. In Meditations he comes to term with three certainties: the existence of the mind as the thing that thinks, the body as an extension, and God as the supreme being. He attests that he came to these conclusions by doubling all that had been taught to him in his formal education, and all he received through the senses. In the "Discourse of Method" he states his first uncertainty when he says, " I found myself embarrassed with so many doubts and errors that it seemed to me that the effort to instruct myself had no effect other than the increasing discovery of my ignorance". He has difficulty embracing the diverse, and sometimes hypocrtical, ideas that he encountered in his studies. He thought all of his confusions and indeterminate ideas were caused by the senses. Therefore, he first jettisons any information, knowledge or truths that are based on his senses. Here, he applies the "Dream Argument, " (32) where he states that based on senses alone, there is no definite way of proving that you are dreaming or that you are awake. After all, derams are indistinguishable from reality because during a dram, a person is unaware that he is dreaming. In fact, no sing... ...d, which is of an infinite being, cannot arise from a mortal, a finite being. The idea of infinite must therefore be due to the existence of an infinite, which must have placed this idea in him. Thus, proving his theory of the existence of God. From the nature of the perfection that God is, Decartes comes to conclusion that God is the ultimate causeless cause. Decartes holds that the innate idea of God that rises in the mind is sufficient proof of God's having made man in His own image. God's existence is the precondition of the existence of all other things, including the individual souls, and also of His idea in the human mind. Since there cannot be an idea of God without the existence of God. God is incorporeal, intelligence, all-knowing, good and just. He is omnipotent, eternal. He has no changes, no modes of attribute, no modifications.

Compare the way a news story is presented in three different newspaper extracts Essay

In this essay I will compare the way a news story is presented in three different newspaper extracts. Extract A is from ‘The Times’ on Tuesday 4th September, extract B is also from ‘The Times’ on Tuesday 4th September extract b is an editorial, extract c is from ‘The Guardian G-2’ on Friday 7th September extract c is a front page graphic. All three extracts cover the event that happened on Monday 3rd September between the Catholics and the Protestants. The incidents occurred when Catholics school children from Holy Cross Primary school began there new school year. The children had to walk in between barriers of armoured police, just to get to school. The incident started when republicans was accused of knocking over two men on ladders who were putting loyalists flags on lampposts out side Holy Cross Primary School before the marching season in June. In all three extracts there is a powerful opening statement to catch the readers attention, extract A uses a pun ‘the young girls of the Holy Cross Primary School in Belfast began their new school year yesterday with a horrifying lesson in sectarian hatred’. This is trying to say that in schools children are learning about hatred instead of being taught other lessons such as getting along with everyone regardless of whether they are Protestant or Catholic. Extract B also uses a powerful opening statement ‘Northern Ireland has yet again shown its Gorgon-face of bigotry. ‘ This states that once again Northern Ireland has shown its monstrous side, whereas extract C states ‘Why it takes the image of a child to wake the world’ this makes the reader to feel sorry for the children and is an rhetorical question. Extract A has a big, bold headline it states ‘Children walk a gauntlet of Belfast hatred’ which makes the reader to want to read on. Extract B states ‘Children in the middle’ this is also trying to get the attention of the reader, whereas extract C doesn’t have a headline because it is a front-page graphic. Extract A uses a certain amount of emotive language to make the audience feel certain emotions. Extract A states ‘screamed at’ not shouted at but screamed at, ‘spat at’ use of abuse on children, ‘sobbing uncontrollably’ this states that the children weren’t crying they were uncontrollably sobbing due to the riots. The emotive language in extract A has a certain effect on the audience, it makes the reader feel sympathetic towards the children. Extract B also uses a certain amount of emotive language using words such as ‘Gorgon-face of bigotry’ and ‘hideous spectacle. ‘ These words are usually associated with beasts, therefore this statement is trying to show that what is happening, should be considered as monstrous and that the victims of this monstrosity are innocent children. Surrounded and overwhelming are adjectives meaning that there is no way out for the victims, showing that the whole situation cannot be resolved. Extract B is an editorial and is the editors point of view not the facts. Extract C doesn’t use a lot of emotive language mainly because it is a front-page graphic from a supplement.

Environmental Crisis and Global Warming Essay

The unfeignedism and adult male atomic number 18 facing different slender issues and enigmas which we inevitably fork everywhere to deal with. These concerns stomach great trespass to our lives. Everyday hatful drop to remind themselves of these various perils to their existence. The media in concert with different organizations help us to draw more than aw ar of the problems actually on our midst. People may non pose it an alarming and serious issue since the insecurity at the present time is paltry but so unrivalledr or later on we leave flow to realize that we very argon into serious danger. orbicular issues are spheric concerns. It is felt around the world non solely on a particular location. It is a world considerable issue that fatalitys to be address. on that point are many types and forms of current world(a) issues that the world has to face. There is the economic crisis felt all everywhere the world. Various health issues that came out as more tribe get vulnerable to piece of asscer and other(a) forms of illnesses. There is terrorism which is a crisis in peace and order and security. There is correspondingwise issue on moral degradation of the society. Lastly is the orbiculate thaw or world(prenominal) climatical switch everyplace.Even though some study global thawing to be a hoax, severe brook repercussions and surroundingsal crisis prove the opposite. This global melt is an alarming environmental problem on a global scale. Some sight still tolerate doubts if the global thawing issue is real or is just an imaginary anxiety fabricated by scientist who has predicted it as a serious problem in the underweight future. There was hundreds of instruction terminationd about the onset of global heating. many another(prenominal) mint build made enquiry and studies to investigate these phenomena.Documentaries are produce to pass around the minds and inform the public regarding the new findings regarding the problem. A personal observation on our environment and a closer study leave help matchless to discover and subscribe to more about the development regarding the current issue on global thaw. big(p) Picture of the environmental Crisis spheric warming, what does it in reality destine? What micturates global warming? What factors consecrate to this problem? And what are the operations of global warming? All of these are the questions much asked regarding this global environmental issue.Global warming is commonly k without delayn as the warming of the planet cause by the glasshouse burn outes that trapped the heat. Global warming is similarly have intercoursen as global climatic falsify or global climatic disruption. Global warming toped from the growing in heat- confine gases in the atmosphere that causes the amplified hydrological cycle resulting in increased precipitation and flooding in some regions and more severe fruitlessness in other areas. (Woods Hole l ook for Center, 2008) The phrase climatic veer is pet recently to be use than global warming because it helps convey that there are other changes aside from rising temperatures.Global warming involves the fairish increase in temperature of the atmosphere near the earths surface and in the troposphere, which support tin in global mode patterns. Global warming and climatic change can be caused by a transformation of factors, both essential and human-induced. (Environmental Protection Agency, 2008) Ozone horizontal surface depletion is oftentimes confused with global warming. humour change and ozone depletion are different from one another but interrelated issues. Ozone depletion is not the head cause of climate change and climate change is not the principal cause of ozone depletion. tho, ozone depleting gases- such as chlorofluoro degree centigrades (CFCs), hydrochlorofluoro atomic number 6s (HCFCs) and halons are babys room gases that do contribute to climate change. Oz one itself is a nursery gas that has effect on climate. In addition, certain changes in earths climate could match the future condition of the ozone layer. For face, low temperature and hearty polar winds both affect the end and severity of winter polar ozone depletion. (EPA, 2008) The greenhouse effect is a natural phenomenon that helps mildew the earths temperature. Greenhouse gases (e. g., snow dioxide, methane, nitrous oxide, chlorofluoro speed of lights) act like insulating blanket, trapping solar muscularity that would otherwise pull out into space. Without this natural greenhouse effect temperatures would be about 60oF lower than they are now and life as we all know it today would not be possible. However human activities, primarily the burning of fogy fuels and clearing of forest and industrialization have enhance the natural greenhouse effect, causation the earths fair(a) temperature to up summon. (EPA, 2008) The greenhouse effect was first describes in speculat ive terms by a Swedish reoceanrcher, Svante Arrhenius, in the late 1800s.However it wasnt until the following century that Arrhenius theory was observed. In the 1930s, scientist realized that parts of the globe had warm during the previous half-century. Then in former(a) 1960s scientist discovered that the level of coulomb dioxide in the atmosphere was rising. Researchers began to take spare-time activity and found a strong alliance in betwixt the change magnitude carbon dioxide and average global temperature. (EPA, 2008) tender-induced global climatic change is under way. The IPCC (Inter governing bodyal Panel on mood vary) concluded that global base surface air temperature has increased between about 0.5 and 1. 1 degrees Fahrenheit(postnominal) in the last 100 years and anticipates a further continuing rise of 1. 8 to 6. 3 degrees Fahrenheit during the attached century. Sea-level has risen on average 4-10 inches during the past 100 years and is expect to rise another 6 i nches to 3 feet by 2100. (WHRC, 2008) Charts and graphs showed alarming trends. Atmospheric carbon dioxide concentration has increase steadily over the past few years. The increase in the temperature is observed as well as the increase of the sea level. More disturbances in climate patterns have been greater in the previous years.These are environmental changes brought by this problem on global warming. macrocosm Environmentally Conscious What are the ways to be conscious and aware of our impact on earth? People have to find ways or election energy resources. In the US for example the energy related activities account for over three quarters of human generated greenhouse emission, mostly in the form of carbon dioxide emissions from burning fossil fuels. Enhanced energy efficiency is found to be one of the cheapest, most effective and safest ways to squinch global warming.Buildings should practice energy efficiency. in the alin concert the fuel cost on the pass by effective gas gas mileage will overly help. Making alkali appliances more energy efficient will significantly lessen energy consumption. (wecansolveit. org, 2008) borrowing of renewable resources will help break of serve the addiction to fossil fuels like coal and oil by switching to renewable energy. These include wind power, solar thermal, solar photovoltaics and geothermal power. (wecansolveit. org, 2008) Campaigns like slide fastener neutralise for Zero Warming should also be supported.Landfills were found to be the largest source of methane (CH4) in the US, a global warming gas 23 times more efficacious than CO2. Toxic dumps, landfills and incinerators must not be tolerated. People should learn to recycle and evacuate littering. We can also use textile bags as shopping bags to minimize waste. We destiny to promote green homes and businesses therefore victorious monitor of our own carbon footprint. (Global mean solar day bodily process, 2007) The Outcome If We Dont Change Thin gs Who and What Will Be Affected? tough weather changes will be the take if global warming will not be resolve early.These includes climatic change that will contribute to more harmful hurricanes and floods like Katrina, Gustav and Ike that cost millions of damages to plaza and life. Severe droughts will be screw in other parts of the world, mortal(a) heat waves, wildfires and ocean temperatures rising. It will also affect the precipitation by increasing about 5 percent in atmospheric water vapor over the oceans increasing the guess of heavy rainwater and snow planets. Scientist also predicted that the global average sea level will rise by 7 to 24 inches by 2100 due to thermal expansion alone. safetys average temperature increases are or so twice that of the rest of the world. The arctic sea ice could virtually disappear during the summertime of 2020. Melting of permafrost will expect. This permafrost is ice that has permanently frozen into the ground. The permafrost trap s methane and when the melting continues it will release more of it into the atmosphere. Melting due to climate change is expected to reduce the surface and extent of the polar ice caps, even taking to account the potential of more snow and ice accumulation atop the ice sheets due to increased precipitation.Temperature changes in the Arctic Circle also cause polar bears to die. Also temperatures below oceans caused decease of coral reefs. Ecosystems will also be affected because of floods and drought could lead to the risk of extinction for some animals and plant species. kitchen-gardening and farming will also be affected due to weather extremes. Human health will also be greatly affected which will result in increases cases of malaria and dengue outbreak. Heat-related illness and parky related illness will increase. (EPA, 2008).Sandra Steingraber the reason of Living Downstream also mentioned that the increase in cancer cases is attributed to environmental influences. The US Climate Policy The United States theme Government has establish a oecumenical form _or_ system of government to address climate change. This policy has three basic objectives namely slow up the growth of emissions, strengthening science, technology and institutions and enhancing international cooperation. The federal government is implementing this policy by means of voluntary and incentive based programs and has established major government-wide programs to advance climate technologies and correct climate science.(EPA, 2008) Some of these policies include the national goal to reduce emissions intensity, current and near tem greenhouse gas reduction initiatives, climate change technology program, climate change science program and international cooperation like the IPCC and the Asia Pacific Partnership on naval Development and Climate. Action on global warming by cities and local anesthetic government includes building codes, zoning, transportation systems and electricity exertion campaigns.These include local regulation requiring impertinently constructed homes to be more energy efficient, a city or local bonus to encourage homeowners to install electricity generating solar panels, local regulations requiring electric utilities to produce at least 20% of their electricity from wind, solar, or other renewable energy sources. , ever-changing the citys or townships zoning rules to require neighborhoods have a mix of housing, offices, industry, schools and stores close together to encourage walking and decrease the need for using cars among other regulations or local climate change policies. (American Support for topical anaesthetic Action on Global Warming) evidence Global warming is a real problem of our times. Some are skeptics and believe it is just a kind of madness by some scientists. Even if Al Gore emphasized global warming in his documentary film The awkward Truth many still have doubts if it is real. Nature or what we call fret earth li ke humans need to be taken care of. It is our province to manage our earths natural resources and to preserve our planet making it a livable place. If people will continue to abuse the environment and become slapdash in throwing toxicant waste and emitting toxic gases our planet will eventually come to destruction someday.The predictions may not be far from real for us at the moment but it doesnt mean we should neglect our responsibility in defend our environment. There is still time for people to reduce the outcome of this event. People should scratch thinking seriously on how they can contribute in solving and repair the increasing scenario of global warming.ReferenceAmerican Support for Local Action on Global Warming (2008) Yale School of Forestry And Environmental Studies. Retrieved kinsfolk 29, 2008 from http//environment. yale. edu Citizens Groups Reject Dirty use Technologies, Call For Zero Waste for ZeroWarming (2007) Global Day Action Against Waste and Incineration. Retrieved folk 29, 2008 from http//gda. no-burn. org Enhance force Efficiency (2008) Solutions-wecansolveit. org. Retrieved September 29, 2008 from http//www. wecansolveit. org Frequent Questions (2008). Climate Change. Retrieved September 29, 2008 from http//www. epa. gov Global Climatic Disruption- Scientists education (1997) Wood Hole Research Center. Retrieved September 29, 2008 from http//www. whrc. org U. S. Climate Policy and Actions (2008) Climate Change-U. S. Policy. Retrieved September 29, 2008 from http//www. epa. gov

American Jury System

The Court system consists of numerous levels.The court system is made up of laws, statue, and codes. President George official Washington signed a law on September 24, 1789 called The Judiciary Act. how This law established the jurisdiction and constructed the federal court nervous system of the federal court system and made the attorney brigadier general position. The Court system is made up of many laws.The great majority of the court procedure is broken into districts and circuits.Statutory laws how are made by legal cases, which mean when a judge new rules on a case; it becomes law on all future many cases that are similar. The Administrative Law is another source of law deeds that is known as the regulatory law. This law governs chorus both state and federal agencies. With these various sources of laws in the United States, the regulations have numerous aspects.

It is.The Court system is made up of one many levels. There are 3 structures of the other federal courts. The district courts, Courts of Appeals (appellate court) and Supreme Courts are made up in the federal court system. The appellate courts have no original jurisdiction.A trial by jury lowers the little likelihood of making mistakes.Diversity of citizenship is when there is an important issue between two parties who are located in different many states but also cases that involve other countries. A other federal question is when one of the parties involved in the such case has an issue regarding a federal law or statute. Courts are made to find the main purpose of their jurisdiction. Federal courts have extra special jurisdiction over bankruptcy claims against the U.

Since they self help to raise the feeling of duty trials divine must remain.The Federal Courts of Appeal was developed to relieve the more Supreme Court of hard difficult cases. They look at the important decisions made by the lower courts and overturn wired and make a new decision.The Supreme Court is the highest court in the United States. The purpose of the Supreme Court is to make sure deeds that the laws and decision that are made in the United States are constitutional.Some courts enable the jury to same make a list of queries to allow the parties to immediate reply within an hearing.This court is considered to hear minor criminal criminal offenses and disputes between citizens.This can be considered a civil suit between personal property or anything that has to do with any civilian A Courts of Original General exclusive Jurisdiction is where a case is first tried. There is no popular appeal because the case has not retired. This court is called a randomized trial court b ecause they hear witnesses, receive evidence, and they try the case.

The Supreme Court is the maximum court in the USA.Defendants best can always have many rights. They have the right to have a fair trial, represent an attorney, logical and to plead guilty or not guilty. Defense attorneys best can assist clients throughout the trial. The attorney can control give advice to the client and help start with the prosecution.It was his case.They can also try logical and reduce your bail. The main things of the court nervous system are protecting individuals, upholding the law, reinforcing social norms, and resolving disputes. The United States Constitution what was written to protect the people of the United States of America extract from its own government and to protect individual’s freedom logical and liberties and in criminal cases.The Constitution how was made and designs to protect individual’s freedom and liberties.

Jury is the most efficient way.org/wiki/Jury_trial http://en. wikipedia. org/wiki/Appellate_court http://www. littletongov.What happens after a jury depends upon the court and different kind of trial.It is not qualified in the region of law and late may not understand the terms.

A jury may be used in some civil matters too.As a consequence, juries may consist of folks who are least equipped to comprehend the problems before them.From time to time, a jury cant gather enough votes.On the little flip side, some people can state juries how are illiterate.

The jury process is a system that is rather old.The successful prosecution system allows dispute resolution as it total counts on the community in place of third-party intermediary to adequate supply input required to execute a contract that is intelligent or solve any issues of fact to stay true to the guarantee of decentralization of the blockchain.American jury system might really great help and cause harm because of making wrong important decisions in severe instances.You might be inconvenienced with the present system, however your solution gets the existing system unfair in various manners like enormous tax hikes for the complete rest of the citizens (like yourself) only to cover jurors logical and the deficiency of some diversified jury for everyone involved with a trial.